The Power to Multiply

Related Downloads


MHP Technology

4.0 x 40.0mm Crosscut - Deskside
4.0 x 40.0mm Crosscut - Departmental
4.0 x 40.0mm Crosscut - Departmental
4 x 40 mm Cross-cut
5 x 50 mm Cross-cut
DAHLE 50322 2x15mm Micro-cut office shredder
2 x 15 mm Crosscut
4 x 40 mm Crosscut
4 x 40 mm Crosscut

Dahle 50422

2 x 15 mm Crosscut
Dahle 50422
Team document shredder for professional use
Innovative MHP® (Matrix High Performance) cutters: high-quality compound steel cutters that are guaranteed to last
Patented manufacturing process preserves resources by considerable saving of raw materials compared to a conventional production of cutting cylinders
More performance by MHP cutting cylinders
Clearly designed, user-friendly control panel with illuminated information and function unit and acoustic signals
Electronic start-stop function controlled by integrated light barrier
Convenient automatic reversing function clears feed opening after feeding in too much paper
Convenient feed and reverse function for manual control
Motor cuts out automatically when waste bag is full or door is open
Automatic shredding stop and optical signal in control panel when bin full
With automatic motor cut-out after 30 minutes without use
Powerful motor for high capacity and longer running times
Extremely quiet operation for a particularly pleasant working atmosphere
Widely opening doors for ease of emptying the waste bag
Convenient swivel casters providing 5 cm floor clearance for greater mobility and two brakes for keeping the shredder firmly in place
Separate main switch for completely shutting down the document shredder
Practical IEC power connector can be unplugged from the document shredder
Dimensions (H x W x D): 944 x 545 x 435 mm
Product nameDahle 50422
Entry width260 mm
Shreds A4 80 gsm paper*11 - 13 sheets
Shred width in mm2 x 15 mm
Security levelsP-5/F-2/T-5/E-4
Oil incl. in ml50 ml
Paper clipsYes
Waste collection volume100 l
dB (A) when idle53 dB(A)
Shredder power consumption650 W
Power supply230 V
Weight net46 kg
Speed4.4 m/min

* Maximum number of sheets which can be cut in a single pass under the following conditions: New cutting cylinders (oiled if necessary), cold motor, power supply with nominal voltage and nominal frequency (230V/50Hz; 120V/60Hz). Non-conformance can lead to a lower sheet capacity and increased running noise. Sheets are fed at 90° either portrait or landscape. The sheet capacity may vary depending on paper properties and feed.


The Power to Multiply